The oil separator sits at the compressor discharge and separates lubricating oil entrained in the hot, high-pressure refrigerant gas, returning it to the crankcase so the compressor always has enough oil. Kilterra KW/OVS oil separators offer high separation efficiency and reliable oil return - standard protection for screw, piston and heat pump systems.
Recommended Maintenance Schedule
- Check oil return line temperature regularly - it should feel warm
- Listen for compressor oil level; falling level points to the separator first
- Check float valve/capillary blockage yearly
- Clean the separator interior during major system service
Daily Inspection Points
- Install between compressor discharge and condenser, as close to the compressor as possible
- Connect the oil return line to the crankcase with proper slope
- Check float valve movement before installation
- Secure the shell to reduce vibration transfer
Maintenance FAQ
- How often does an oil separator need maintenance? - Check oil return and level yearly.
- What does oil return line temperature tell you? - Warm is normal; cold means poor return.
- Can an oil separator solve all oil-loss problems? - No; line slope and return design must work together.
- Do R32 systems need different separators? - Yes, higher pressure rating.
For 37 years Kilterra has focused on one thing: build refrigeration components right, deliver them on time. Oil Separator supports OEM/ODM customization - factory visits, sample testing and volume partnerships are welcome.